Test No. MI-128/01.
Masking Lotion Water Resistance
Objective: To evaluate Millefolium masking lotion's water resistance
compared with a leading brand.
|
|
Apply 0.5 ml of masking lotion and spread it evenly on the
hand. Let it dry for 10 minutes at 60% R.H.
|
| Millefolium |
Leading Brand |
|
|
After 3 minutes under running water on the affected area at a speed of
6 liter/min. Water temperature 20C at a distance of 10cm.
|
| Millefolium |
Leading Brand |
|
Result shows that Millefolium Masking lotion is not
affected. Leading brand partially comes off, it has less water resistance.
|
Test No. MT-12419.
Hair Building Fiber Adhesion to Hair/Scalp
Objective: To evaluate Magic Hair's adhesion to hair/scalp and
compare it with a leading brand of hair building fiber.
|
|
Before application
|
|
|
|
After application of one thin coat
|
|
Millefolium
Magic Hair
|
Leading brand of
Hair building fiber
|
|
After a stream of air from a hair dryer at air speed 1 liter/sec is directed
toward the applied area for 30 sec from an angle of app. 45 degrees at
a distance of 20 cm.
|
|
Millefolium
Magic Hair
|
Leading brand of
Hair building fiber
|
|
Results. As the picture shows, Magic Hair shows good adhesion
to hair scalp with no sign of any separated fiber due to the air flow.
Leading brand at least 70% blown off.
Conclusion: Leading Brand can only be used safely if application
is followed by a hair spray.
|
Test NoMT-98/12
Masking Lotion Drying Time
Objective: To evaluate Millefolium masking lotion's drying time
compared with a leading brand by using the FM510 conductivity meter.
|
|
Apply 0.5 ml of Masking lotion on the hand. Evenly spread
it. Let it dry for 10 minutes at R.H.60%. Measure conductivity after 5 minutes.
|
|
Millefolium
|
Leading Brand
|
|
Results:
G = 2 (1/Ohm)
Indicating that the application area is dry.
|
Results:
G = 21 (1/Ohm)
Indicating that the application area is not yet dry.
|
